Gas Separator

Collar-Size Gas Separators designed with thin-wall tubing, large ports and minimum lengths to optimize gas separation from the liquid that enters the pump. The gas separators are constructed from carbon steel, an extra cost option of constructing the gas separator completely from stainless steel is available upon request.

The Collar-Size Gas Separators are designed with thin-wall tubing, large ports and minimum lengths to optimize gas separation from the liquid that enters the pump. These separators have greater liquid and gas capacities than other gas separators. The gas separators are constructed from carbon steel. An extra cost option of constructing the gas separator completely from stainless steel is available upon request. The OD of the outer barrel of the gas separator is the same OD as the tubing collar. The collar at the top of the separator is attached to the bottom of the pump seating nipple. An optimum size dip tube is permanently mounted inside the outer barrel. A half-collar is located at the bottom of the separator with a bull plug attached to the bottom of the half-collar. A joint of tubing can be run below the bottom half-collar to act as a solids collection chamber if desired. The length of the gas separator is approximately 5.5 feet.

Sinergining Adhi Selaras carries this unit in stock and can usually ship within 24 hours.

Ordering Information